Not all product tests generate an automated test report at the end. Very often, one or more tests during the manufacturing process are manual, where the results are documented on paper or in a spreadsheet file. This causes significant limitations in understanding the performance of these inspections and ensuring traceability. Use WATS Manual Inspection Module to ensure full unit traceability of your manual work.
”Storing test data and analyzing them was as long as I can remember always a challenge. It stopped suddenly in the moment I started using WATS!
Matthias StrauĂźProduction Manager Service and Support,Sennheiser
The Manual Inspection Module in WATS features a sequence builder where you can graphically design the test flow and a web interface that takes the test operator through all the necessary steps. The resulting report goes directly into the same database as the rest of the test data, and you ensure full unit traceability.
Watch this short Video Introduction on how to use WATS to document Manual Inspection routines during electronics production.
Virinco AS
Grønland 1
NO - 3045 Drammen
NO: + 47 40 00 36 32
US: +1 608 852 7328
Email: sales@virinco.com
© 2024 WATS.
